lear_wang 发表于 2016-7-15 11:41:36

allegro导不出nc route

大家好，我现在用allegro导不出nc route，是不是我的方法错了？

以下是ncroutte.log

Processing NC Parameters file 'nc_param.txt' ...

NC PARAMETERS
-------------

FORMAT                   5.5
MACHINE-OFFSET                x:0.00000        y:0.00000   (inch)
FEEDRATE                1
COORDINATES                ABSOLUTE
OUTPUT-UNITS                ENGLISH
TOOL-ORDER                INCREASING
REPEAT-CODES                YES
SUPPRESS-LEAD-ZEROES        NO
SUPPRESS-TRAIL-ZEROES        NO
SUPPRESS-EQUAL                NO
TOOL-SELECT                NO
HEADER                        none
LEADER                        12
CODE                        ASCII
SEPARATE                YES
SEPARATE-ROUTING        YES
OPTIMIZE_DRILLING        YES
ENHANCED_EXCELLON        YES
SCALE                        1.000000


WARNING(SPMHMF-326): Cannot find NC Route bit tool file 'ncroutebits.txt'
WARNING(SPMHMF-327): ... will auto-generate bit tool file 'ncroutebits_auto.txt'.

Auto-generating tool file 'ncroutebits_auto.txt' ...

   0.0358T01      

-------------------------------------------------------------

Pre_processing non-plated route path data ...

WARNING(SPMHMF-296): No route path data was found for processing.


-------------------------------------------------------------

Processing non-plated slot hole data ...

WARNING(SPMHMF-323): No non-plated slot holes were found for processing.
-------------------------------------------------------------

Pre_processing plated route path data ...

WARNING(SPMHMF-296): No route path data was found for processing.


-------------------------------------------------------------

Processing plated slot hole data ...

OVAL      slots routed: 4
RECTANGLE slots routed: 0

-------------------------------------------------------------

NC Route file 'TX_V11_plated.rou' created ...

-------------------------------------------------------------

Program completed.

cyf1029 发表于 2016-8-14 21:49:11

谢谢分享，支持楼主

TLZme 发表于 2017-12-27 19:47:31

看看！

infox 发表于 2017-12-27 19:53:28

不错不错！

mingguang_wang 发表于 2017-12-27 20:04:34

支持！

visicom 发表于 2017-12-27 20:07:46

不错不错！

skycoverann 发表于 2017-12-27 20:07:50

不错不错！

ghost 发表于 2017-12-27 20:11:00

支持！

wenchang_c 发表于 2017-12-27 20:11:14

学习学习，谢谢！

lanchenglin2006 发表于 2017-12-27 20:11:24

学习学习，谢谢！
页: [1] 2 3 4 5 6 7 8
查看完整版本: allegro导不出nc route