allegro导不出nc route-电路知识笔记

大家好，我现在用allegro导不出nc route，是不是我的方法错了？

以下是ncroutte.log

Processing NC Parameters file 'nc_param.txt' ...

NC PARAMETERS
-------------

FORMAT    5.5
MACHINE-OFFSET x:0.00000 y:0.00000 (inch)
FEEDRATE 1
COORDINATES ABSOLUTE
OUTPUT-UNITS ENGLISH
TOOL-ORDER INCREASING
REPEAT-CODES YES
SUPPRESS-LEAD-ZEROES NO
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL NO
TOOL-SELECT NO
HEADER none
LEADER 12
CODE ASCII
SEPARATE YES
SEPARATE-ROUTING YES
OPTIMIZE_DRILLING YES
ENHANCED_EXCELLON YES
SCALE 1.000000

WARNING(SPMHMF-326): Cannot find NC Route bit tool file 'ncroutebits.txt'
WARNING(SPMHMF-327): ... will auto-generate bit tool file 'ncroutebits_auto.txt'.

Auto-generating tool file 'ncroutebits_auto.txt' ...

   0.0358  T01

-------------------------------------------------------------

Pre_processing non-plated route path data ...

WARNING(SPMHMF-296): No route path data was found for processing.

-------------------------------------------------------------

Processing non-plated slot hole data ...

WARNING(SPMHMF-323): No non-plated slot holes were found for processing.
-------------------------------------------------------------

Pre_processing plated route path data ...

WARNING(SPMHMF-296): No route path data was found for processing.

-------------------------------------------------------------

Processing plated slot hole data ...

OVAL    slots routed: 4
RECTANGLE slots routed: 0

-------------------------------------------------------------

NC Route file 'TX_V11_plated.rou' created ...

-------------------------------------------------------------

Program completed.