小哥

yuemingchen 发表于 2017-12-25 08:12
以下是更换为英文路径后的log信息，还是那个错误。

INI File Location:\Cadence\SPB_Data\cdssetup\ ...

将文件压缩上传上来，我来看看！

yuemingchen

小哥 发表于 2017-12-24 22:50
1、建议路径不要有空格和中文。
2、将page页面复制到一个新的dsn工程里面再次生成网络表试试。

以下是更换为英文路径后的log信息，还是那个错误。

INI File Location:\Cadence\SPB_Data\cdssetup\OrCAD_Capture/16.6.0/Capture.ini

********************************************************************************
*
*  Design Rules Check
*
********************************************************************************
--------------------------------------------------
Checking Schematic: Shaker Detect_VER.a
--------------------------------------------------
Checking Electrical Rules

Checking For Single Node Nets

Checking For Unconnected Bus Nets

Checking Off-Page Connections

Checking Pin to Port Connections

Reporting Off-Grid Objects

Reporting Ports

Reporting Off-Page Connections

Reporting Globals
    GND
    5V
Checking Misleading Tap connection

INFO(ORCAP-2207): Check Bus width mismatch
INFO(ORCAP-32002): Netlisting the design
INFO(ORCAP-32004): Design Name:
D:\PCB_PRACTICE\WGSW1_004_010_VER_A.DSN
Netlist Directory:
D:\PCB_PRACTICE
Configuration File:
D:\Cadence\Cadence_SPB_16.6-2015\tools/capture/allegro.cfg

Spawning... "D:\Cadence\Cadence_SPB_16.6-2015\tools\capture\pstswp.exe" -pst -d "D:\PCB_PRACTICE\WGSW1_004_010_VER_A.DSN" -n "D:\PCB_PRACTICE" -c
"D:\Cadence\Cadence_SPB_16.6-2015\tools/capture/allegro.cfg" -v 3   -l 31 -s "" -j "CB Footprint" -hpath "HPathForCollision"
#1 ERROR(ORCAP-36020): Unable to read design "D:\PCB_PRACTICE\WGSW1_004_010_VER_A.DSN".
#2 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.

Exiting... "D:\Cadence\Cadence_SPB_16.6-2015\tools\capture\pstswp.exe" -pst -d "D:\PCB_PRACTICE\WGSW1_004_010_VER_A.DSN" -n "D:\PCB_PRACTICE" -c
"D:\Cadence\Cadence_SPB_16.6-2015\tools/capture/allegro.cfg" -v 3   -l 31 -s "" -j "CB Footprint" -hpath "HPathForCollision"
INFO(ORCAP-32005): *** Done ***

小哥

1、建议路径不要有空格和中文。
2、将page页面复制到一个新的dsn工程里面再次生成网络表试试。